|
AMC-BL890S Component list ：
|
Product
|
DESCRIPTION |
QUANTITY |
BMB-16-5V |
Main Unit
|
1
|
BIO-24 |
Extend I/O Board
|
1
|
| BTR-10 |
Temperature control
|
1
|
| GC-890 |
LCD Panel
|
1
|
T -50C |
Power supply |
1 |
|
S-250-24 |
Power supply |
1 |
S-100-48 |
Power supply |
1 |
CAB-9 |
9P Cab Line |
2 |
9P Cab Line |
16P Connector
|
1
|
26P-LINE |
26P Connector
|
1
|
| 9544 |
Relay Board
|
1
|
| BCO-3 |
Current Output Board |
1 |
B) 1.Control Panel(GC-890S)
| A)1. Control Panel |
| Display CPU |
SiS550 SOC (32Bit @200MHz) |
| Display Module |
10.4” TFT LCD (800*600) Bright: 230nit |
| OS ： Windows CE |
| LCD Brightness Adjust VR |
| Memory of mold data |
Build In :32MB DOC (Programs+200 set Mold Data ) |
| USB DISK(1Kbyte/ one Mold Data ) |
| Connections Interface |
2 * RS-232 |
| 3 * USB (USB Printer & Other USB Equipments) |
| 1 * Printer port (Printer) |
| 1 * Ethernet port |
| 2 * PS/2 (Keyboard, Mouse) |
| Sound Output |
Built-in Buzzer |
| Input Keyboard |
64 (TACT-SWITCH) |
| LED indicators |
7 |
| Connections |
9P D-Sub cable, PS/2 connecter |
| Dimension |
300 * 530 * 55mm |
| Weight |
5KG |
B) 2. BMB-16
-5V
| 1. BMB-16-5V |
| Main Unit CPU |
ARM7 (32bit @66MHz) |
| Memory capacity of program |
1MB Flash Memory |
| Memory Card |
1M∼4MB Flash Memory Card（
Option
） |
| Connections Interface |
1 * RS-232
1 * RS-422/485 |
| Connections |
26 PIN Connectors |
| Dimension |
210 * 185 * 40mm |
| Weight |
1.3KG |
| 1-1
Input/Output |
| Input points |
16 （ Built-in 8 Fast Counter ） |
| Input voltage |
24 VDC |
| Input current |
Each point 10 mA DC limited |
| Output points |
16 |
| Output voltage |
28 VDC |
| Output current |
Each point 2 A (MAX.) |
| Operating voltage |
24 ∼ 30 VDC |
| LED indicators |
Input LED : 16 & Output LED : 16 |
| 1-2 D/A Analog Output (Voltage) |
| Output channels |
5 (0 ∼ 10V) |
| Compatible Valve |
PQ-S, MEV, EFBG, BOSCH, and 2P.1Q. |
| Resolution |
16bit, 1/65536 |
| 1-3
A/D Analog Input |
| Input channels |
6 ch (potential meter & pressure sensor) |
| Input voltages |
0 ∼ 5VDC |
| Resolution |
16 bit, 1/65536 |
B) 3. BIO-24
| Input points |
24 |
| Input voltage |
24 VDC |
| Input current |
Each point 10 mA DC limited |
| Output points |
24 |
| Output voltage |
28 VDC |
| Output current |
Each point 2 A (MAX.) |
| Operating voltage |
24 ∼ 30 VDC |
| LED indicators |
Input LED : 24 & Output LED : 24 |
| Connections |
26P Connectors |
| Dimension |
210 * 185 * 40mm |
| Weight |
1.3 kg |
B) 4. BTR-10
| Number of channels |
9 CH |
| Oil temperature display |
1 CH |
| Input |
CA (K) type |
| Range |
0 ∼ 399℃ |
| Control |
PID + Auto tuning |
| Alarm |
Over/Lower oil temp. 、 sensor open |
| Output |
10 ch (zone) to SSR + 2 ch ratio output |
| LED indicators |
Output LED 12ch + RUN indicator 1ch |
| Output current |
Each point 40 mA(MAX.) |
| Connections |
16 PIN connectors |
| Dimension |
178 * 120 * 40 |
| Weight |
750 g |
4.
T -50C Power Supply :
| Input Voltage |
AC 85V ∼ 132V, AC 170V ∼ 264V by switch |
| Output Voltage |
DC 5V 4A , 15V 1A , -15V 1A |
| Weight |
540g |
| Dimension |
159 * 97 * 38mm |
5.
S-250-24 Power Supply :
| Input Voltage |
AC 90V ∼ 132V, AC 176V ∼ 264V by switch |
| Output Voltage |
DC 24V, 10A |
| Weight |
1.3Kg |
| Dimension |
150 * 140 * 86mm |
6.
S-100-48 Power Supply :
| Input Voltage |
AC 85V ∼ 132V, AC 170V ∼ 264V by switch |
| Output Voltage |
DC 48V, 2A |
| Weight |
620g |
| Dimension |
199 * 98 * 38mm |
7. CL-9544 Relay Board ：
| Input Voltage |
DC 28V |
| Output |
A contact , 4 point |
| LED indicators |
4 |
| Dimension |
120 * 60 * 20mm |
8 . BCO-3 Analog Output(Current) :
| Output channels
|
3 CH |
| Pressure output
|
0 ∼ 40 VDC ， (EFBG 10~40 Ω ) |
| Speed output
|
0 ∼ 40 VDC ， (EFBG 10~40 Ω ) |
| Back Pressure
|
0 ∼ 40 VDC ， (EFBG 10~40 Ω ) (Option) |
| Output ratio
|
Pressure 1 : 1 、 Speed 100% output |
| Frequency of output
|
200 Hz (Changeable by EFBG specification) |
| Data setting points
|
Controlled by program, unlimited |
| Connections
|
16 PIN connectors |
| Dimension
|
178 * 120 * 40 |
| Weight
|
750 g |
|
